Arlington council denies Furlane rezone request for roughly 8.8 acres
Loading...
Summary
The council denied a privately initiated rezone request (Furlane) to change roughly 8.77 acres across four parcels from Residential Low Capacity to Residential Moderate Capacity, following staff analysis and planning commission recommendation.
The Arlington City Council voted to deny a privately initiated rezone request (referred to as the Furlane rezone) that sought to change about 8.77 acres across four parcels from Residential Low Capacity to Residential Moderate Capacity.
Planning staff member Amy recapped the request and noted it was a non‑project rezone. She and councilmembers discussed that the petitioner had not submitted firm development plans and that a single additional home would not meet minimum density requirements; Amy said the property already had around 108 units and that adding one would put it at 109—exceeding the staff‑reported unit limit (as described in the staff report). Based on staff analysis and the Planning Commission recommendation, Councilmember (unnamed mover) moved to deny the request; the motion was seconded and passed unanimously.
Why it matters: Denial keeps the existing Residential Low Capacity designation and maintains current density controls. Staff said petitioners may return in the future with revised proposals or pursue replacement of existing structures through standard building permits.
Implementation notes: Staff noted petitioners could return for rezoning in a future docket year; demolition and like‑for‑like replacement through building permits would remain an option without rezoning.
—
