Citizen Portal
Sign In

Get Full Government Meeting Transcripts, Videos, & Alerts Forever!

Get email alerts on the Telecom Tower topic

No spam. Unsubscribe anytime.

Planning Commission approves Georgia Power/Diamond application for communication tower with conditions

Augusta Georgia Planning Commission · February 3, 2026
AI-Generated Content: All content on this page was generated by AI to highlight key points from the meeting. For complete details and context, we recommend watching the full video. so we can fix them.

Summary

The commission approved a special exception to place a lattice-style telecommunication tower at an existing Georgia Power substation on Dean’s Bridge Road, subject to a 197.6-foot maximum height, a 30-foot access easement and a 50-foot tree buffer; staff reported no opposition in the record.

The Augusta Georgia Planning Commission approved a special exception to allow a lattice-style telecommunication tower on a Georgia Power substation at 4436 Dean’s Bridge Road, with staff conditions.

Rachel Martin, planner with Planning & Development, said the applicant initially proposed a 199.5-foot structure and subsequently agreed to shorten the design so the final permitted height does not exceed 197.6 feet (including lightning rod). Staff reported the parcel is used as a Georgia Power substation, is not in a flood hazard area, and that an FAA aeronautical study found the proposed tower would not be an obstruction to air navigation.

An applicant representative confirmed the tower would have a small adjacent equipment compound, would be unlit at night with a dull gray finish, and would be limited to technician access. Staff recommended approval with conditions including the maximum height, a 30-foot access and utility easement tying into Dean’s Bridge Road, and maintaining a 50-foot undisturbed tree buffer between the enclosure and the northern residential property; the applicant accepted those conditions and the commission approved the special exception.

Next steps: the project must meet site-plan and engineering requirements and obtain development permits before construction.