Citizen Portal
Sign In

Get Full Government Meeting Transcripts, Videos, & Alerts Forever!

Get email alerts on the Rezoning Site Plan topic

No spam. Unsubscribe anytime.

Planning commission tables site plan for 2,800‑sq‑ft office amid glazing, alley and access concerns

Eastpointe City Planning Commission · March 6, 2026
AI-Generated Content: All content on this page was generated by AI to highlight key points from the meeting. For complete details and context, we recommend watching the full video. so we can fix them.

Summary

The Eastpointe City Planning Commission tabled consideration of a proposed 2,800‑square‑foot office/storage building that seeks rezoning to MU1 and waivers for façade glazing and alley access, asking the applicant to return with revised drawings addressing a front door, the northern triangular parcel and utility/parking issues.

The Eastpointe City Planning Commission on a procedural vote on February 5, 2026, agreed to table a site‑plan review for a proposed roughly 2,800‑square‑foot office and storage building that would require rezoning of a rear triangular parcel to MU1 and several waivers from city standards.

Commissioners and staff spent the bulk of the discussion dissecting design and technical compliance issues: staff noted the proposal falls short of the ordinance’s 40% façade glazing requirement (the submission shows about 37.2%), proposes four designated electric‑vehicle charging spaces, and contemplates repaving or vacating a public alley to accommodate a dumpster and an electrical transformer. The applicant said the business is a three‑employee real‑estate company that intends to use the parking lot for customer and staff access and prefers a side entrance for cost and operational reasons.

Why it matters: the commission must balance ordinance standards that promote walkable, pedestrian‑oriented frontages with the practical configuration of a small office use; the discussion also highlights how utility siting and alley vacations can trigger rezoning or easement needs and affect surrounding residential parcels.

Staff presentation and technical issues Mr. Myers, the staff presenter, identified the primary outstanding items: the potential need to vacate the public alley to pave and site a transformer, several engineering comments, and the façade glazing shortfall. “This is the site plan you received in your packets,” Mr. Myers told the commission, describing the building, landscaping and proposed EV chargers, and noting the need to comply with MU1 architectural standards.

Staff also noted impervious surface and parking calculations: the zoning ordinance requires employee parking for small businesses (occupancy under 50), and as drawn the project provides more parking than necessary, a factor that contributes to higher impervious coverage.

Applicant response and alternatives An applicant representative said the front entrance is located off the parking lot because the business does not expect walk‑in retail customers and that installing a street‑front door would be materially more expensive. The applicant added that leaving the northern triangular parcel as grass (if it could not be used for dumpster access) would increase pervious area and help meet coverage requirements.

Utility constraints were central to the conversation: staff reported discussions with DTE about transformer siting and said relocating the transformer behind the building (rather than in the alley) could avoid an alley vacation, but easements or recorded access agreements would still be necessary to ensure parcel functionality.

Commissioners’ position and next steps Commissioners diverged on how strictly to enforce the glazing standard for a small office building: some said the roughly 2.8 percentage‑point shortfall could be acceptable, while others pressed for a front door or a redesign. To give the applicant time to revise drawings addressing the front door, the triangular parcel and the glazing percentage, the commission moved to table the site plan and asked staff and the applicant to return next month with a revised submission.

Formal action and procedural note The commission made and seconded a motion to table the item and called the roll; the motion was tabled for consideration at the commission’s next regular meeting. The secretary performed a roll call as part of the motion; individual roll‑call results for the table motion are not fully transcribed in the Media.