Get Full Government Meeting Transcripts, Videos, & Alerts Forever!
Get email alerts on the Water Systems topic
No spam. Unsubscribe anytime.
Pump swap, deepening and rates: board weighs pump house fixes and financing
Summary
Director Leitzinger reported a temporary pump drawing excessive amperage and a static water level drop from about 75 ft to 112 ft; contractor will swap pumps and may lower the pump further in the ~860‑ft well. The clerk said Johnson Block advised using the water utility fund for controller replacement rather than a general obligation loan.
Get email alerts on the Water Systems topic
No spam. Unsubscribe anytime.
Director of Public Works Keith Leitzinger told the board a temporary pump installed at the pump house is drawing excessive amperage, indicating a motor overload concern. The contractor will swap the pump and investigate whether the static water level fall from roughly 75 feet to 112 feet is causing the overload. Leitzinger noted the well is about 860 feet deep and that the pump could be lowered further in the casing if required.
Clerk/Treasurer Shawna Atterbury said Johnson Block & Co. advised the village that replacing the pump house controller should be funded through the water utility fund rather than a general obligation loan tied to property tax levies. The firm also recommended consideration of a simplified rate case in the future and suggested sewer rates may need to increase as capital projects proceed.
