Get Full Government Meeting Transcripts, Videos, & Alerts Forever!
Get email alerts on the Amethyst Falls Preliminary Plat topic
No spam. Unsubscribe anytime.
Commission approves Amethyst Falls preliminary plat and waives block‑length standard for the subdivision
Summary
TMAPC approved the Amethyst Falls preliminary plat (336 lots, ±75 acres) and a modification to allow greater block lengths; approval is subject to TAC conditions including infrastructure, phasing and ROW dedications. Vote was 10-0.
The Commission approved the preliminary plat for Amethyst Falls, a proposed subdivision of approximately 336 lots on about 75 acres, and granted a modification to the Subdivision and Development Regulations (Section 5.030 Table 5‑1) to permit longer block lengths. Staff recommended approval subject to TAC conditions including provision of water, sewer, stormwater, right‑of‑way dedication for S. 193rd Ave. E., floodplain/detention coordination, and phasing plans with final plat filings scheduled from October 2027 through October 2031.
TAC conditions include: submission of a subdivision control data sheet, removal of contours from final plat submittal, identification of addresses, coordination on detention and possible T-LOMR/LOMR steps, sanitary sewer sizing to carry flows from the north and east, and resolving a potential conflict with an existing 20‑ft R/W easement to PSO. The Commission approved the preliminary plat and modification 10‑0; the motion was made by Commissioner Humphrey and seconded by Commissioner Shivel.
Staff noted a City of Tulsa release letter is required prior to final plat approval and that detailed engineering and IDP permits will be required before recording final plats.
