Town staff: hydrant flushing exposed flawed tower valve; replacement and mapping planned

Oct 17, 2025

Staff told council hydrant flushing triggered a town-wide pressure loss, found the water tower has a valve sized for a 70-foot tower instead of Trafalgar's 101-foot tower, and described plans to buy a proper valve and GPS equipment to map valves to prevent future outages.

The full story

Staff described a hydrant-flushing operation that led to a near town-wide loss of water pressure and prompted a multi-agency response. "Our tower is 101 feet tall," staff said while explaining that the currently installed valve is rated for a 70-foot tower and therefore has not allowed the tower to fill to capacity; staff added that SCADA monitoring has been unavailable for years and that Verizon is working on restoring monitoring.

The town described immediate remedial actions: securing a proper altitude valve to replace the undersized unit, addressing a continuous 0.25-inch discharge that has been losing water, and a program to map and locate valves. Staff said they will buy GPS tracking equipment and map valves, then physically exercise and verify the locations to avoid future system-wide shutoffs. "We're gonna locate these valves. We're gonna purchase some GPS tracking equipment," staff said, describing the plan and named internal and external helpers to execute the mapping and repairs.

Written with AI from the event video and transcript. Check it against the source ↓