Sewer board logs multiple controller and service-call repairs across system
May 26, 2026
City sewer staff reported repeated controller failures and service calls at multiple addresses, including several Vanleer Hwy locations and Spring Street, describing controller replacements, timer issues, and a pump replacement at Hwy 47.
The full story
Mayor Garland Breeden convened the sewer board and heard a report from Sewer Manager Chad Morrow on a string of equipment failures and service calls across the city’s vacuum sewer system.
Morrow listed several specific service calls and repairs: a controller replacement at 721 Spring St.; debris clearance at 112 Phillips; a controller replacement at 3032 Vanleer Hwy and 3118 Vanleer Hwy; replacement of a failed pump at 3928 Hwy 47; and a tank event at 767 Spring St. where a broken surge suppressor prevented the controller from firing. Morrow said similar controller and timer problems appeared repeatedly on Vanleer Hwy addresses and that a controller/valve at 3025 Vanleer Hwy was replaced. These itemized locations and equipment failures indicate recurring controller/timer reliability problems.
Morrow also reported an operational spike in vacuum pump hours over the weekend of May 18; crews inspected sewer pots and found several controllers firing too long and a few valves hanging open. After making repairs, he said pump hours dropped. The board did not record additional remedial policy directives at the meeting beyond the field fixes listed in the minutes, and the meeting adjourned following routine business.
Written with AI from the event video and transcript. Check it against the source ↓
